Free shipping on pull out shelves to the lower 48 states additional charges for HI AK
Pull Out Shelves That Slide
Pull Out Sliding Shelves, Cabinet Pull Out Shelves Or Kitchen Shelves That Slide
No matter what you call them they all serve the same purpose: ease of access. Pull out sliding shelves are designed to bring the back of the cabinet to you without bending and reaching into the abyss. Pull out shelves slide out on wheels, ball bearings or a hydraulic system. All of our shelves that slide hardware is rated to hold up to 100 pounds. Don’t hassle digging through a tranche of cookware out of lower cabinets, make your cabinets work for you by installing kitchen pull out shelves.
Everything we use to make our pull out sliding shelves is C.A.R.B. compliant. Our baltic birch pull out sliding shelves are prefinished with a UV protective coating that is baked into the wood giving it an elegant look. All bottom boards are now made out of birch plywood to give a consistent look.
Whether you design your pull out shelves with 3/4 extension slides, ball bearing slides or concealed under mount slides your pull out shelves will glide smoothly.
Check out our online store and customize your pull out shelves that slide order today!
Pull Out Pantry Shelves That slide
Pull Out Sliding Shelves
Measuring & Installing Pull Out Shelves
How to measure for Pull Out Sliding Shelves
How to measure for Pull Out Sliding Shelves
How to measure for Pull Out Sliding Shelves
Measuring for pull out shelves is simple. Using a standard tape measure you will want to get exact dimensions for the cabinet in which you desire to have pull out shelves. In order for these shelves that slide to work, you must use the most narrow measurement at the clear opening, obstruction free for the shelf to pull out. Normally, that measurement would be frame to frame, or frame to side of door if impeding in the opening. Sometimes the measurement will be frame to hinge at the bottom of the cabinet if the hinge protrudes into the opening. With a standard 3“ side wall you can clear the hinge if there is 4” between the cabinet floor and the bottom of the hinge. The object is to get the clear opening for the shelf to slide through the door without anything in its way.
Door protectors
How to measure for Pull Out Sliding Shelves
How to measure for Pull Out Sliding Shelves
Door protectors, or the white plastic thing included in your hardware pack, is to be screwed over the pull out shelf hardware at the front of the shelf on the door side to prevent scratching the inside of the door. These only work with 3/4 extension slides.
Base/existing shelf installation
Base/existing shelf installation
Base/existing shelf installation
Upon receiving the pull out sliding shelves, you will want to pair your hardware with the shelf for each cabinet and method of installation. For base mount with 4 L brackets on 3/4 extension slides or ball bearing, putting the slides on the shelf before you insert the pull out will make it easier to align. Simply slide the hardware onto the shelf, then angle the unit 45 degrees to go in the cabinet and set in place inside the cabinet. Gently pull the shelf forward about 6 inches to expose the rear brackets. Drive one provided screw into a side to side slot, in case you need to make an adjustment later. Push the shelf back and squeeze the slides to the shelf to ensure the front is lined up, then gently pull the shelf all the way out making sure the front of the slides do not move. Drive another screw into the front brackets side to side slot. Insert the shelf to check for alignment. Once confident the slides are accurate, drive one more screw into each of the brackets round slots. Congratulations! You just completed installing your first pull out shelf.
Half shelf/rear mount install
Base/existing shelf installation
Base/existing shelf installation
Once you have paired the hardware with the pull out shelves accordingly, you may begin the installation process. Half-shelf and rear mount installation will require a tape measure and torpedo level. Pictured above is the rear mount and half-shelf installation. Rear mount has a bracket off the back end of the slide that attaches to the rear wall, half-shelf has an L bracket on the back side that will screw directly over the shelf in the cabinet. Installation is similar in that both methods will attach to the frame at the front of the cabinet/opening. Using a torpedo level ensures the pull out shelf will not roll one way or another once installed.
The Slides
Euro 3/4 extension slides
Knape & Vogt Ball bearing soft close
Knape & Vogt Ball bearing soft close
Euro 3/4 extension slides are standard on our pull out shelves. They are rated to hold up to 75 pounds. The runners are mounted on the outer side of the shelf where they are exposed when the shelf is pulled out. They can be bottom mounted with an L bracket that attaches to the base of a cabinet, side or rear mounted, as well as half-shelf. These are durable steel slides with nylon rollers that are smooth, quiet and reliable.
Knape & Vogt Ball bearing soft close
Knape & Vogt Ball bearing soft close
Knape & Vogt Ball bearing soft close
Knape & Vogt ball bearing soft-close slides are rated to hold up to 100 pounds and proudly made in the USA. These reliable slides glide smoothly and retract on their own when the soft close feature is engaged. There’s no need to worry about your sliding shelves being slammed shut with these.
Tandem with Blumotion
Knape & Vogt Ball bearing soft close
Tandem with Blumotion
Blum Tandem with Blumotion concealed under mount slides are the Cadillac of the slide industry. Made in the USA, we back these slides for life. Not only are these slides full extension soft-close, they are completely hidden when extended. These are the best slides on the market in our opinion.
Shipping & Returns
Shipping
We pack every order with the utmost care for your pull out sliding shelves to ensure they arrive intact. Starting with shrink wrap around each shelf, wrapped together for multi-shelf orders, we place them in corrugated boxes. Next, we put 1” styrofoam and bubble wrap to fill the gaps. Lastly, we make sure the boxes fit securely around the shelves so they do not move in transit. We tape each edge so our carriers have no edge to grab possibly ripping the box.
Returns
We insure every package, In the event that something happens to your shelves we will seek reimbursement from the carrier. Please email Aaron@theshelfguy.com for the steps to take for damaged in transit goods.
Not satisfied with our shelves? We will take returns within 10 days of delivery, to be returned at your expense with a 20% restocking fee. Please call or email to make arrangements.